Cage Clamps

General Standard 14″ No Tack Clamp

H&M carries General Standard, Hydraulic and Ratchet Clamps for 2″- to 60″-diameter pipe. Each is hinged for easy positioning around the pipe and is available with flat (tack) or arched (no tack) crossbars. The Standard Pipe Clamp features a lever and a cam to tighten the clamp around both ends of adjoining pipe.

NOTE: General Pipe Clamps are only designed for aligning pipe ends while welding. They are not to be used to support the weight of the pipeline while lifting or moving, nor are they to be used with shims, wedges or cheaters.

The Hydraulic Clamp employs an eight-ton hydraulic jack for opening and closing the clamp. This feature is especially valuable when aligning 16″- to 60″-diameter pipe.

General Hydraulic Pipe Clamp

General Hydraulic Pipe Clamp

The Ratchet Clamp features precision-cut Acme thread design for strength and easy operation and has an enclosed operational mechanism to prevent mud and dirt contamination. The General Ratchet Pipe Clamps are available for 10″- to 60″-diameter pipe.

General Ratchet Pipe Clamp

General Ratchet Pipe Clamp

The Ratchet Clamp features precision-cut Acme thread design for strength and easy operation and has an enclosed operational mechanism to prevent mud and dirt contamination. The General Ratchet Pipe Clamps are available for 10″- to 60″-diameter pipe.